| Polyester | Silicon | Sun Clean | Hi-poly | SUNTEK | Laminated | Super Galum Color | P.V.D.F | Sun Dura | Emboss | Green Board | 대전방지 | 항균 칼라강판 | AI-Color |
제품특성 및 용도
1998년 BIEC International Inc.로 부터 라이센스를 받고 이제품을 생산하고 있다.
- 55% 알루미늄-아연 합금도금 강판(슈퍼갈륨) 소재에 수요가 NEEDS에 따른 다양한 수지를 도장한 칼라강판
- 알루미늄의 초내식성과 아연의 희생방식성을 이상적으로 겸비한 고내식성 칼라강판으로 기존의 도장용융강판 보다 내식성이 3~6배까지 우수
내구성이 우수합니다.
동일 도금두께의 아연도금강판과 비교하여 내구성이 3~6배 우수
경제적입니다.
55% Al-Zn 도금층이 아연도금층에 비해 밀도가 낮아 제품의 톤당 면적 약 1~3% 증가
도장성이 우수합니다.
아연도금강판에 비해 도금층과 페인트의 밀착성 우수
가공성이 우수합니다.
가공성은 아연도금강판과 동일하며 특히 가공부에서의 도금층 미세균열이 적어 가공부위의 내구성 우수
-
샌드위치 판넬
-
지붕성형판
-
해안가 공장지대
도장제품 단면
도금층 조성
조성 | 중량비(%) | 용적비(%) |
알루미늄 | 55.0 | 80 |
아 연 | 43.4 | 19 |
실리콘 | 1.6 | 1 |
수주범위
검사항목
- Polyester
Test item | Test method | Test result | Related specification |
Cross cut test |
100 × 100 TAPING TEST |
Good | KS D 3520 |
Pencil Hardness test | 45˚, 1H and over | Good | KS D 3520 |
Bending test | 180˚×3T | Good | KS D 3520 |
Impact test | 500g×12.7㎜φ×500㎜H | Good | KS D 3520 |
Salt water spray test | 5%Nacl 35˚ | 500hours Good |
KS D 9520 JIS Z 2371 |
Resistance to Chemicals | 5%H₂SO₄×5Hr 5%NaOH×5Hr |
Good Good |
DS-B-I-1112 |
Accelerated weathering test |
Weather-O-Meter | 750hours Good |
JIS Z 0230 |
Film Hardness test | M.E.K Rubbing | 40Times Good |
DS-B-I-1112 |
- Silicon
Test item | Test method | Test result | Related specification |
Cross cut test | 11×11-㎜ | Good | KS D 3520 |
Pencil Hardness test | 45˚, 1H and over | Good | KS D 3520 |
Bending test | 180˚×3T | Good | KS D 3520 |
Impact test | 500g×12.7㎜φ×500㎜H | Good | KS D 3520 |
Salt water spray test | 5%Nacl 35˚ | 750hours Good |
KS D 9520 JIS Z 2371 |
Resistance to Chemicals | 5%H₂SO₄×5Hr 5%NaOH×5Hr |
Good Good |
DS-B-I-1112 |
Accelerated weathering test |
Weather-O-Meter | 1300hours Good |
JIS Z 0230 |
Film Hardness test | M.E.K Rubbing | 40Times Good |
DS-B-I-1112 |
- SUN CLEAN
Test item | Test method | Test result | Related specification |
Cross cut test | 11×11-㎜ | Good | KS D 3520 |
Pencil Hardness test | 45˚, 1H and over | Good | KS D 3520 |
Bending test | 180˚×3T | Good | KS D 3520 |
Impact test | 500g×12.7㎜φ×500㎜H | Good | KS D 3520 |
Salt water spray test | 5%Nacl 35˚ | 750hours Good |
KS D 9520 JIS Z 2371 |
Resistance to Chemicals | 5%H₂SO₄×5Hr 5%NaOH×5Hr |
Good Good |
DS-B-I-1112 |
Accelerated weathering test |
Weather-O-Meter | 750hours Good |
JIS Z 0230 |
Film Hardness test | M.E.K Rubbing | 80Times Good |
DS-B-I-1112 |
- PVDF
Test item | Test method | Test result | Related specification |
Cross cut test | 11×11-㎜ | Good | KS D 3520 |
Pencil Hardness test | 45˚, 1H and over | Good | KS D 3520 |
Bending test | 180˚×3T | Good | KS D 3520 |
Impact test | 500g×12.7㎜φ×500㎜H | Good | KS D 3520 |
Salt water spray test | 5%Nacl 35˚ | 500hours Good |
KS D 9520 JIS Z 2371 |
Resistance to Chemicals | 5%H₂SO₄×5Hr 5%NaOH×5Hr |
Good Good |
DS-B-I-1112 |
Accelerated weathering test |
Weather-O-Meter | 1000hours Good |
JIS Z 0230 |
Film Hardness test | M.E.K Rubbing | 40Times Good |
DS-B-I-1112 |
적용규격
KS D 3770
ASTM A792